teccor ? brand protection thyristors axial leaded www.littelfuse.com ?2006 littelfuse do-15 series (a/b rated) specifcations are subject to change without notice. 1 telecom design guide do-15 series (a/b rated) sidactor ? device this do-15 plastic package provides a through-hole version of the sidactor? device. this axial leaded device is ideal for customer premises equipment (cpe) such as telephones, answering machines, modems, fax interfaces. the do-15 package series can also be used for overvoltage protection for applications such as t1/e1/j1 trunk cards when the appropriate overcurrent protection is included. electrical characteristics description features protection solution to meet ? rohs compliant ? bidirectional transient voltage protection ? axial lead through-hole component ? teccor brand sidactor technology part number _ = a or b marking _ = a or b v drm @l drm =5a v s @100v/s i h i s i t v t @i t =1 amp capacitance @1mhz, 2v bias volts volts mamps mamps amps volts pf min max min max max max min max p1100g_lrp p11_ 90 130 150 800 1.0 5 30 60 p1300g_lrp p13_ 120 160 150 800 1.0 5 25 40 p1500g_lrp p15_ 140 180 150 800 1.0 5 25 40 p1800g_lrp p18_ 170 220 150 800 1.0 5 25 40 p2300g_lrp p23_ 190 260 150 800 1.0 5 25 30 p2600g_lrp p26_ 220 300 150 800 1.0 5 25 30 p3100g_lrp p31_ 275 350 150 800 1.0 5 20 30 p3500g_lrp p35_ 320 400 150 800 1.0 5 20 30 ? yd/t 950 ? yd/t 993 ? yd/t 1082 ? gr 1089 intra-building ? iec 61000-4-5 ? itu k.20/21 basic level ? tia-968-a ? all measurements are made at an ambient temperature of 25c. ? listed sidactor devices are bidirectional. all electrical parameters and surge ratings apply to forward and reverse polarities. agency approvals agency agency file number e133083
teccor ? brand protection thyristors axial leaded www.littelfuse.com ?2006 littelfuse do-15 series (a/b rated) specifcations are subject to change without notice. telecom design guide series i pp 10x1000 s 10x560 s amps amps min min a 45 b 80 100 ? i pp applies to -40c through +85c temperature range. ? i pp is a repetitive surge rating and is guaranteed for the life of the product. surge ratings t r x t d pulse waveform v-i characteristics i h i t i s i drm v drm v t +v -v +i -i v s 50 100 0 t r t d 0 peak va lu e half v alue t ? t ime (s) i pp ? peak pulse current ? %i pp t r = rise time to peak value t d = decay time to half valu e w aveform = t r x t d -8 -40 -20 0 2 0 4 0 6 0 8 0 100 120 140 160 -6 -4 0 2 4 6 8 10 12 14 junction t emperature (t j ) ? ?c per cent of v s change ? % 25 ?c 0.4 -40 -20 0 2 0 4 0 6 0 8 0 100 120 140 160 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 case t emperature (t c ) ? ?c ratio of i h i h (t c = 25 ?c ) 25 ?c normalized v s change versus junction temperature normalized dc holding current versus case temperature
teccor ? brand protection thyristors axial leaded www.littelfuse.com ?2006 littelfuse do-15 series (a/b rated) specifcations are subject to change without notice. telecom design guide refow condition pb C free assembly pre heat - temperature min (t s(min) ) 150c - temperature max (t s(max) ) 190c - time (min to max) (t s ) 60 C 150 seconds average ramp up rate (liquidus temp (t l ) to peak) 5c/second max t s(max) to t l - ramp-up rate 5c/second max refow - temperature (t l ) (liquidus) 220c - time (min to max) (t s ) >60 C <150 seconds peak temperature (t p ) 250 +0/-5 c time within 5c of actual peak temperature (t p ) 20 C 40 seconds ramp-down rate 5c/second max time 25c to peak temperature (t p ) 8 minutes max. do not exceed 280c soldering parameters physical specifcations terminal material matte tin-plated axial leads lead solderability mil-std-750, method 2026 environmental specifcations operating/storage temperature -40 c to ~ +150c passive aging 125 c, 1000 hours meet spec humidity aging +85c, 85% r.h. 1000 hours meet spec thermal shock mil-std-202 method 107g +85c/-40c 100 times meet spec solvent resistance mil-std-202, method 215 no change vibration mil-std-883c, method 2007.1, condition a no change dimensions do-15 series [25.40 ] 1.00 0 [25.40 ] 1.00 0 mi n mi n dimensions in inches and (millimeters) [0.71 ] .02 8 .03 4 [0.86 ] [2.60 ] .10 4 .14 0 [3.56 ] [7.62 ] .30 0 .23 0 [5.80 ]
teccor ? brand protection thyristors axial leaded www.littelfuse.com ?2006 littelfuse do-15 series (a/b rated) specifcations are subject to change without notice. telecom design guide fir st line: pr oduct name (see marking column in table on page 1) se cond line: lot numbe r xxxx xxxx part marking system part numbering system package type description packing quantity added suffix industry standard do-15 axial 5000 rp eia rs-296 packaging tape and reel specifcation symbol description inches mm a component spacing (lead to lead) 0.200 0.020 5.08 0.508 b tape spacing 2.062 0.059 52.37 1.498 c tape width 0.250 6.35 d max. off alignment 0.048 1.219 e reel dimension 13 330.2 f max hub recess 3 76.19 g max. abor hole 0.68 17.27 h reel dimension 2.75 69.85 construction va ri at ion 0 p : sing le sidactor chip used as a si ng le device pa cking st yle rp : reel pack per eia rs-296 surge i pp rating a 45amp 10x1000 s b : a : 80amp 10x1000 s pa ck ag e t ype g : do-15 l : rohs complian t device t ype : sidactor pxxx 0 l x rp medi an volt ag e xxx : xxx volt s g off center bo th side s (0.039" ) b overal l length c a e f g h labe l recess depth max 0.75? d off center bo th side s (0.039" ) b overal l length c a e f g h labe l recess depth max 0.75? d
|
